Print Page | Close Window

gmos 04

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112411
Printed Date: May 17, 2024 at 7:52 AM


Topic: gmos 04

Posted By: Matrix7333
Subject: gmos 04
Date Posted: March 16, 2009 at 9:32 AM

Hello all,

I have the pricey POS GMOS 04 that is draining the battery on my 06 escalade ext.  It totally killed the battery within 10 hours even on a new battery.  Is there a better alternative? i chose this one because it let me retain on star and bose premium. Can I wire a relay to this to stop the drain, if so, where do I put it so I can retaio RAP feature.

Thanks




Replies:

Posted By: kgerry
Date Posted: March 16, 2009 at 12:02 PM
are you sure it's the module??  i've used dozens of these with no issues at all......

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: sparkie
Date Posted: March 16, 2009 at 6:48 PM
The proper thing to do, would be to hook up a digital meter and test for a draw on the battery. If there is, disconnect the module and see if the drain goes away. Don't assume something is bad until you have facts to back it up. Those modules are good and reliable, but like everything else, nothing is perfect.

-------------
sparky




Posted By: Mike M2
Date Posted: March 16, 2009 at 9:37 PM
If it is turning the radio off when you open the door it is hard to believe a GMOS is causing your problem. Current draw that strong would burn the thing up. As Sparky said do a current draw test or Try unplugging it overnight once and see if it kills it.

-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: woodn01
Date Posted: March 16, 2009 at 9:48 PM
if you use the meter to do the current draw test, disconnect the radio first leaving the module plugged in. it could be the radio and not the module. if the draw is still there with the radio unplugged, unplug the module and see what happens. but i agree with the other guys that the module shouldn't make that big of a draw. if you still want to change modules you can go with PAC OS-2BOSE




Posted By: Matrix7333
Date Posted: March 16, 2009 at 10:30 PM
Thanks fellows, I am doing the current draw test right now.





Print Page | Close Window