Print Page | Close Window

Opinions on clamp connectors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1125
Printed Date: July 26, 2025 at 9:38 PM


Topic: Opinions on clamp connectors

Posted By: awd_sr
Subject: Opinions on clamp connectors
Date Posted: June 04, 2002 at 7:02 PM

I'm ahout to install an alarm in my Altima and Cherokee and I wanted to check with you guys about those clamp connectors.  The ones where you just place the connector over the wire you want to splice into, and you put the wire from the alarms harness in the groove, then clamp it shut with pliers.

Is it best to solder the connection and tape or heat shrink?  Thanks




Replies:

Posted By: bberman1
Date Posted: June 04, 2002 at 10:21 PM




Posted By: awd_sr
Date Posted: June 04, 2002 at 11:05 PM
cool, thanks bberman1, this will definitely help out




Posted By: Velocity Motors
Date Posted: June 04, 2002 at 11:14 PM

NO TO T-TAPS !! BOOOO !! posted_image Solder all connections for the best results posted_image



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: awd_sr
Date Posted: June 05, 2002 at 6:24 AM

thanks Jeff, I'll take those back to Radio Shak and get my 1.98 back  :)

Thanks again u guys!






Print Page | Close Window