09 saturn aura

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112557
Printed Date: May 17, 2025 at 12:51 AM

Topic: 09 saturn aura

Posted By: dhookjr
Subject: 09 saturn aura
Date Posted: March 21, 2009 at 9:29 PM

Need some help w/ an 09 Saturn Aura Transponder info. picked up a dlkgm module that doesn't seem to work, also read of the XK06 draining the battery. IN combination w/ this what data wire do I connect to? I've got one tech sheet that says Dk Green Pin 1 at connector under the drivers dash. Other that says a white at connector in center console fuse panel or WHITE/ black in center console fuse panel.

Any info would be greatly appreciated..

Replies:

Posted By: chadwa2003
Date Posted: March 22, 2009 at 8:29 PM

use a ads-al-ca idatalink.ca it will do everything for you and it should be easier to install. Also if you use a remote starter with an rs-232 port it will minimize your connections

Posted By: davlop
Date Posted: March 23, 2009 at 11:03 AM

I second that module!! posted_image

Good product and is an easy install and has many extra features!!

Posted By: loneranger
Date Posted: March 23, 2009 at 2:10 PM

chadwa2003 wrote:

.. Also if you use a remote starter with an rs-232 port it will minimize your connections

Not all manufacturers with RS-232 ports use the same protocols.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

Posted By: jim hunter
Date Posted: April 22, 2009 at 11:16 AM

as with pretty much all new gm vehicles i program a blank key and use a universal key inbox bypass,ring takes some work to get in around dash(same as 09 malibu)but at least this way if something remote start fails car stil starts with key, cutting cars reader wires routing them thru bypass could cause no start with key if bypass fails, only need ignition/accessory/constant hot at ign no requirement for whit wire with resistors

Print Page | Close Window