doing some research on viper 5901 alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112566
Printed Date: May 16, 2025 at 8:24 AM

Topic: doing some research on viper 5901 alarm

Posted By: zenica
Subject: doing some research on viper 5901 alarm
Date Posted: March 22, 2009 at 11:16 AM

I am doing some research right now, both here and with Google on the
Viper 5901 Alarm│Remote Start system. It seems to use some pretty
sophisticated technology and I am hoping it makes the install less arduous than when I installed the 791XV.

This is direct from Viper: "XpressPort™ - Dock the Innovations Award-winning CANMAX400DEI databus interface into the Responder LC3 CPU, for a direct digital connection to virtually every new vehicle and databus architecture on the planet."

Am I correct in understanding this means that for window control, trunk release or door lock control, the alarm would interface through the databus connection?

Does anyone have this alarm installed on their 03-05 Z?

Replies:

Posted By: zenica
Date Posted: March 23, 2009 at 3:56 PM

Anyone??

Posted By: davlop
Date Posted: March 23, 2009 at 4:42 PM

Your Car does not use that module. U need CANBUS MULTI Doorlock & Transponder Interface (DLPK).

All DEI Alarms are great! It's all in the install!!

DLPK (2005 Nissan 350 Z)

W2W
CC-Defrost Activation
CC-Heated Seats Activation
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Driver Priority Unlock
DL-Fuel Door Release
DL-Sliding Door Control Driver
DL-Sliding Door Control Passenger
DL-Trunk / Hatch Release
PK-GM PASSKey3+ Bypass: No Key Req
PK-Transponder Bypass: Data NKR
RS-RAP Shut Down (Remote ACC Power)
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Front Door Pins
SS-Entry Monitoring Hood Pin
SS-Entry Monitoring Trunk/Hatch Pin

Posted By: zenica
Date Posted: March 23, 2009 at 7:45 PM

Thank you for the reply.

These are the options my Z has, so the alarm can operate
these when remote started?

W2WCC-Defrost Activation
CC-Heated Seats Activation
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Fuel Door Release
DL-Trunk / Hatch Release

I assume this is so I do not need to tap into the tach signal
for the remote start and overrun feature?

RS-Tach / RPM Output

What would these be used for?

DL-Driver Priority Unlock
PK-Transponder Bypass: Data NKR
RS-RAP Shut Down (Remote ACC Power)
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Front Door Pins
SS-Entry Monitoring Hood Pin
SS-Entry Monitoring Trunk/Hatch Pin

Does this imply I would not require the module that houses
a key to allow remote start?

PK-GM PASSKey3+ Bypass: No Key Req

Posted By: zenica
Date Posted: March 25, 2009 at 8:29 PM

Anyone familiar with the module suggested by davlop?