viper 350hv into 94 accord lx
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112855
Printed Date: June 16, 2024 at 3:01 PM
Topic: viper 350hv into 94 accord lx
Posted By: djvoodoo
Subject: viper 350hv into 94 accord lx
Date Posted: April 01, 2009 at 7:31 PM
hello i just bought this alarm new online thinking it would be like installing a head unit . altho it seems to be very few wires . there is zero documents on line to install this . i have found a link https://www.commandocaralarms.com/wiring/1994-1995/Honda/Accord/663.html i feel the data is there except a clear exlenation of the starter kill relay , i am just afraid of shorting the alarm and wasting 80$ has any one done some thing similar to this? i think i will do a how to page and post it on the web if i can do this my self and avoid paying 50 for install thank you al- ------------- ass grass or gas :)
Replies:
Posted By: t&t tech
Date Posted: April 01, 2009 at 7:50 PM
what wires do you need help with, this install is pretty straight forward, let me no what you need, i'll help you out step by step, the starter wire is blk/white from the steering ignition harness, cut this wire in half, connect the green wire on the relay to the side coming from the key and the black to the side going into the engine, the orange to the orange on the main harness, and the yellow to the blk / YELLOW from the ignition harness.
Posted By: djvoodoo
Date Posted: April 01, 2009 at 8:00 PM
that helps a great deal thank you do i switch it to negative or leave it on posative output?
-------------
ass grass or gas :)
Posted By: djvoodoo
Date Posted: April 01, 2009 at 8:04 PM
sorry the brain ------------- ass grass or gas :)
Posted By: howie ll
Date Posted: April 02, 2009 at 1:53 PM
Do you switch what to neg output?
Posted By: djvoodoo
Date Posted: April 02, 2009 at 1:58 PM
the light flash out put
-------------
ass grass or gas :)
Posted By: howie ll
Date Posted: April 02, 2009 at 3:46 PM
Look on this site top right, vehicle wiring, go into your vehicle and it will list what type, in Europe we always go to the indicators rather than lights so I'm afraid you will have to look up and see which type.
Posted By: howie ll
Date Posted: April 02, 2009 at 3:50 PM
According to this site, I just did what I told you to do by the way, it's RED / black at the fuse box on I think a blue plug. Just test with a DMM.
Posted By: djvoodoo
Date Posted: April 02, 2009 at 6:03 PM
door lock 3 pin harness from what i reckon blackwhite above fuse panel = green on greenblue harness orange on car = blue b/w right of colum = door trigger imput zone 3 green main harness .. white in ?negative or posative out put for "indicators" i am really greatfull from the help form every one ... thank you -al ------------- ass grass or gas :)
Posted By: djvoodoo
Date Posted: April 02, 2009 at 7:17 PM
newbie question but it it neccesary to remove paint and drill to chasie for ground or it it possible to jump of brackets under dash and around radio / that are metal
-------------
ass grass or gas :)
Posted By: t&t tech
Date Posted: April 02, 2009 at 8:04 PM
not necessary, once the bolt you're grounding on is bare and penetrating metal, i've installed hundreds of these, only ever had one incidence with the ground corroding away and causing problems,
|