automate 7

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112857
Printed Date: July 18, 2025 at 3:54 PM

Topic: automate 7

Posted By: harrisell1
Subject: automate 7
Date Posted: April 01, 2009 at 9:11 PM

This is the problem that just occurred. I have an 04 Yukon Denali with the automate 7 both remotes will not respond unless

I'm just about up on the car. Batteries were replaced, still the same problem. It sounds like something on the antenna or

something. This just all of sudden started happening.

Thanks in advance.

-------------
electronics

Replies:

Posted By: Mike M2
Date Posted: April 02, 2009 at 6:42 AM

I had an Avalon that had the same issue and the AM7 had to be replaced....

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: Chris Luongo
Date Posted: April 02, 2009 at 9:23 AM

I can't remember, but I think I saw a bad antenna do that once.

It could never hurt to unplug the antenna for a few minutes and plug it back in. See if that does anything.

Posted By: harrisell1
Date Posted: April 02, 2009 at 10:25 PM

Now for some reason the remotes are working like nornal. I didn't do anything to the car.

I will unplug and plug the antenna back in just to make sure it's seated. I've had it on the

car for five years with no problem at all until recently. I guess it's due for something to happen.

-------------
electronics

Print Page | Close Window