8l3z 19g365 ba
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112900
Printed Date: May 10, 2025 at 10:32 PM
Topic: 8l3z 19g365 ba
Posted By: aurora24
Subject: 8l3z 19g365 ba
Date Posted: April 03, 2009 at 8:55 PM
chev104275, I have the 8L3Z-19G365-BA module now, but how do I get it over my ignition ??? Tried to pull it off, any sugestions? Does it fit over or under the transponder on the column. Thanks.
Replies:
Posted By: mikvot
Date Posted: April 03, 2009 at 9:35 PM
Man, it makes it so much easier for us to help you, if you would post all your questions under one thread. You have 3 back to back questions. instead of being able to answer everything in one shot, I have to click on 3 different questions. Have you pulled the steering column cover?
-------------
Posted By: aurora24
Date Posted: April 03, 2009 at 11:42 PM
Thanks mikvot, but I was hoping chev104275, replied as he was the one who replied to my prievious question. I only wanted him to expand on his answer. I thought my question was clear in that as I did state his name. I am not use to this forum, but I use several other forums, with my motorcycle, and atv group. I am very close to finishing this project, and I love this group. Thanks.
Posted By: mikvot
Date Posted: April 04, 2009 at 12:01 AM
aurora24 wrote:
Thanks mikvot, but I was hoping chev104275, replied as he was the one who replied to my prievious question. I thought my question was clear in that as I did state his name.
The easiest way to get ahold of him, would be to pm him directly....that's what it's there for -------------
Posted By: aurora24
Date Posted: April 04, 2009 at 12:24 AM
Thanks again mikvot. I did research this before attempting this, and unfortunately the weather did not agree with me. Lieing upside down on my seat in the rain...lol. I have learned alot from this forum, and with my current military experience of over 30 years, I am not afraid of the job, but we do try to do things by the book... In this case the book was vague..., and my other answers were all different.. I am not familiar with this forum for how things are done, but I plan to stay here for a while. I figure I am over 1/2 way thru this install, at only a cost of $60.00, including the interface, so I had only a few questions left to ask. Thanks all.
Posted By: mikvot
Date Posted: April 04, 2009 at 12:31 AM
No problem....well, if you have any questions, you think i might be able to answer for you, let me know. I've installed for Ford dealerships for the last 5 years, so I consider myself qualified to answer any Ford questions.
-------------
|