viper 5901 no unlock r/s re lock?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112950
Printed Date: May 02, 2024 at 12:12 PM
Topic: viper 5901 no unlock r/s re lock?
Posted By: peterubers
Subject: viper 5901 no unlock r/s re lock?
Date Posted: April 06, 2009 at 4:28 PM
So .. this unit won't let you UNLOCK... REMOTE START .. THEN RELOCK AFTER SUCCESSFUL START?
What's the setting for that -- not clear in the menu 1, 2, or 3, and i'd be pretty surprised if this wasn't a feature of this r/s brain.
thx
-------------
The search function is your friend.
Replies:
Posted By: loneranger
Date Posted: April 06, 2009 at 4:33 PM
I believe it will, if you have "ignition-controlled locks"(menu 1, sub-menu 5, option 2 or 3) enabled.
-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: peterubers
Date Posted: April 07, 2009 at 6:55 AM
didn't work... any other possibilities? thnx
-------------
The search function is your friend.
Posted By: another-kelly
Date Posted: April 07, 2009 at 8:50 AM
connect the "factory alarm disarm" to your unlock wire in the vehicle (use a relay if it's anything but a low current neg. trigger needed for unlock) then take the small gauge purple wire in the small green harness (200mA 2nd Starter Output) and connect it (again with a relay if needed)to your lock wire in the vehicle.
Posted By: chadwa2003
Date Posted: April 08, 2009 at 10:13 PM
you can just use factory disarm and factory rearm wires just make sure the polarity is correct
Posted By: enice
Date Posted: April 10, 2009 at 5:04 PM
another kelly is right but you need to put a diode in between the purple wire because it back feeds if you dont.
|