can bus wire location in 2007 tahoe

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113060
Printed Date: May 15, 2024 at 12:00 AM

Topic: can bus wire location in 2007 tahoe

Posted By: Shelbydis
Subject: can bus wire location in 2007 tahoe
Date Posted: April 11, 2009 at 2:29 PM

I am doing an Viper 160XV install on a 2007 Chevy Tahoe. I have a 1701G directed interface to work with the SUV. I am looking for the location of the CAN bus wire. A photo to go along with the responce would be great. Also need to find out if this interface module is an ok one to work with this Tahoe. Really don't feel like having issues with this once its all installed.

Thanks in adavance,

Steven

Replies:

Posted By: xicano21
Date Posted: April 11, 2009 at 2:58 PM

sorry for no pic but hope this helps, the wire you are looking for is at the OBD connector it should be a light green wire, ( read in the manual of the bypass module for the description of the it) it should be at the bottom row pins and yes that interface is correct for that year

Posted By: Shelbydis
Date Posted: April 11, 2009 at 3:04 PM

Is there a way to test this wire with a DVM (digital volt meter)?

How about location with connector number and pin number?

Thanks,

Steven

Posted By: Velocity Motors
Date Posted: April 11, 2009 at 10:23 PM

GREEN wire at the PK3+ module at the ignition switch. It's next to the BLACK/ WHITE wire in a 5 pin BLACK connector. Depending on the bypass module, you may have to connect the DATA wire at this location and not at the diagnostics plug.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window