08 chevy hhr alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113064
Printed Date: July 16, 2025 at 8:16 PM
Topic: 08 chevy hhr alarm
Posted By: daddy4life85
Subject: 08 chevy hhr alarm
Date Posted: April 11, 2009 at 4:34 PM
So my brother in law bought an 08 HHR and I'm installing his stereo and alarm system for him. It's been a while since I've installed an alarm and some things are a bit different. We bought a Viper 5901, and a CANMAX400DEI bypass module. I've been reading over the instructions and they aren't very clear on what I don't need to use on the alarm as far as wiring. All I seem to be able to gather is that I don't need to use the 12pin wiring harness, in one part it says I don't need the 4 pin but in another part it says I do? The rest of the wiring harnesses appear to be for remote start and door locks. I know the bypass module takes care of door locks and windows and what not but what about remote start? I know there was an optional remote start on the HHR but he doesn't have it. So do I need to run remote start wires? If so I'm guessing I need some diodes, resistors and a relay or 2.
Any help is much appreciated! I've been trying to get everything straight before I start the install on the alarm.
Replies:
Posted By: daddy4life85
Date Posted: April 11, 2009 at 5:18 PM
Someone gave me the Directed installer wiring guide for the 08 HHR so I think I have everything I need now!
|