wireing diagram for pt cruser

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1132
Printed Date: July 24, 2025 at 3:34 AM

Topic: wireing diagram for pt cruser

Posted By: drinkenbuddie
Subject: wireing diagram for pt cruser
Date Posted: June 04, 2002 at 11:11 PM

Hey I have an alarm and want to put it in a pt crusier and I looked just like I did for my truck and you guys had it for my truck but no go for newer cars What's up. So it's a band new one 2002 pt crusier.

Please help!!!!!!!

Replies:

Posted By: Velocity Motors
Date Posted: June 04, 2002 at 11:23 PM

Chrysler

PT Cruiser

2001-2002

Remote Starter Wiring Colors and Notes
Function		Vehicle Color	Location
Start:		YELLOW	IGNITION SWITCH HARNESS *
Ignition #1:		BLUE	IGNITION SWITCH HARNESS
Ignition #2:		BLACK/ ORANGE (HEAT/AC)	IGNITION SWTICH HARNESS
Ignition #3:		N/A
Accessory:		BLACK/ WHITE (RADIO)	IGNIITON SWITCH HARNESS
Brake Light:		WHITE/ TAN	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:		DK. BLUE/TAN	AT COILS
Parking Lights:		BLACK / YELLOW (+)	AT LIGHT SWITCH
Headlights:		VIOLET/WHITE (+)	AT LIGHT SWITCH
OEM Alarm Disarm:		DK. GREEN	IN DRIVER'S DOOR ****
OEM Alarm Arm:		DK. GREEN	IN DRIVER'S DOOR ****
Diesel Glow Plug:		N/A
Clutch Bypass Wire:		N/A
Notes:	* This Vehicle Is Equipped Wiith Chrysler's Smart Key Engine Immobilizer.

Chrysler

PT Cruiser

2001-2002

Alarm and Keyless Entry Wiring Colors and Notes
Function		Vehicle Color	Location
Constant +12 Volts:		PINK/BLACK	IGNITION SWITCH HARNESS
Starter Kill:		YELLOW	IGNITION SWITCH HARNESS *
Ignition +12 Volts:		BLUE	IGNITION SWITCH HARNESS
Dome Lights/Superv:		TAN (DRIVER'S)	DK. BLUE/ORANGE (ALL OTHERS) **
OEM Horn:		RED / BLACK (-)	STEERING COLUMN HARNESS
Power Lock:		WHITE/ DK. GREEN	UPPER KICK PANEL ***
Power Unlock:		WHITE/ DK. GREEN	UPPER KICK PANEL ***
Trunk Release:		N/A	FOLLOWS DOOR LOCKS
Alarm Input Wire:		TAN (DRIVER'S)	DK. BLUE/ORANGE (ALL OTHERS) **
Notes:	Of The Doors. A Negaive Pulse Through A 2.7 K-Ohm Resistor Will Arm The Factory Alarm

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: drinkenbuddie
Date Posted: June 06, 2002 at 2:44 AM

Hey there buddie thanks I sure like that and hope I can do something for you some day. I gots to go install me an alarm!!!!!!!

Posted By: Velocity Motors
Date Posted: June 06, 2002 at 8:24 AM

Good luck and Here's a little more info for the 2002 PT Cruiser:

HATCH trigger : TAN/BLACK ( driver's kick )
Driver side door trigger : TAN
All other door trigger : BLUE/ORANGE ( Passenger kick panel )

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Q2Installs
Date Posted: June 13, 2002 at 11:27 PM

Thanks for your help guys....That is a big help....Why don't you guys list resistor levels though in your tech notes? Just curious

Thanks again......

Posted By: Velocity Motors
Date Posted: June 14, 2002 at 5:20 AM

You mean like this :https://www.the12volt.com/resistors/resistors.asp

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA