any alarm 2way compustar
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113206
Printed Date: May 14, 2025 at 1:14 AM
Topic: any alarm 2way compustar
Posted By: big4ever
Subject: any alarm 2way compustar
Date Posted: April 16, 2009 at 7:10 PM
Hi folks, I was browsing the net for some answer to my question and found your great forums! I own a Ford Mustang GT 2005 and I got a compustar 2way alarm installed on tuesday from the great best buy!
everything work fine on it... maybe a little too much lol
i have a appointement on next wensday to check out my situation but would like to have your opinion.
1- when i arm it, and disarm and make couple query to see the status my dome light and radio goes on (dome light 15 sec i think and radio the factory time) that i can live with that... but after if i leave the car disarm the dash comes on and stay open until i re arm or put the key in the ignition. weird no?
2- the alarm have been triggerd many time... i tought the shock sensor was too high, but no after shutting off the sensor through my remote its getting me always false alarm like some one open my door (door triggered).
every +/- 30 min my car alarm ring for no reason. so for now i keep my alarm to valet mode like this i dont disturb all my neighbors.
did you guys see the second situation before?
i just hope if best buy dont find the problem they will refund me and take back their defective alarm.
Thanks
Replies:
Posted By: KarTuneMan
Date Posted: April 16, 2009 at 9:12 PM
Door pins.... where and how did you do them?
-------------
Posted By: big4ever
Date Posted: April 16, 2009 at 9:19 PM
KarTuneMan,
Its the Best Buy Installer who did the job.
im just try to find info to tell him what expert think it will be.
i know he install a wire to the dome light or dome light supervision.
it is right? how can i double check the doorpins?
Posted By: Velocity Motors
Date Posted: April 16, 2009 at 10:04 PM
On the new Mustangs, they rest at N/C so when the computer on the car shuts off, it goes to an open circuit causing a false alarm. If you have a CM5000 CPU you should be able to program it to accept the open circuit door trigger.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: big4ever
Date Posted: April 17, 2009 at 6:20 AM
Velocity Motors wrote:
On the new Mustangs, they rest at N/C so when the computer on the car shuts off, it goes to an open circuit causing a false alarm. If you have a CM5000 CPU you should be able to program it to accept the open circuit door trigger.
Velocity Motors, my alarm model is 2WSHLCDA ( https://www.bestbuy.ca/catalog/proddetail.asp?logon=&langid=FR&sku_id=0926INGFS10107938&catid=22514 ) can i try to program it myself to accept open circuit door trigger? can you tell me how to do it? i really appreciated -------------
Posted By: big4ever
Date Posted: April 19, 2009 at 7:40 AM
any one?
Posted By: howie ll
Date Posted: April 19, 2009 at 9:08 AM
Open circuit door pins on a 2005? Unlikely, more likely they didn't follow the 1076 diagramme, also If I remember only the hood switch was open circuit. I remember fitting a normal hood switch to one.
Posted By: Velocity Motors
Date Posted: April 19, 2009 at 11:43 AM
The individual door trigger wires are Normally Close type. They rest at ground with the door closed and go to an open circuit with the door open. The driver door is lt. GREEN/ black at the SJB, black 26 pin plug, pin 2. The passenger door is yellow/lt. green at the SJB, black 26 pin plug, pin 6. Ask the installer to use the dome light wire instead and program the Compustar to activate the dome light delay ( Feature 3-03 / Option 4 ) AUTO so that it will arm the system AFTER the Compustar sees the dome light turn off. ( if using a CM4300 CPU ) Dome light wire color: lt. GREEN/ YELLOW | - | sjb, gry 26 pin plug, pin 25. |
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Velocity Motors
Date Posted: April 19, 2009 at 11:47 AM
BTW: The option chart changes if you have a CM3000 series CPU. Check to see which one you have or just make sure that the guys over at Best Buy changes the dome light delay option when using the dome light as the door trigger.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|