Print Page | Close Window

2002 mazda protege alarm wiring diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11322
Printed Date: November 01, 2025 at 3:25 PM


Topic: 2002 mazda protege alarm wiring diagram

Posted By: AMANGILL
Subject: 2002 mazda protege alarm wiring diagram
Date Posted: March 23, 2003 at 12:19 PM

need the alarm diagram asap thank you

-------------
aman



Replies:

Posted By: draasch
Date Posted: March 23, 2003 at 1:50 PM
what brand of alarm are you using??

Constant 12 volts BLACK IGNITION SWITCH HARNESS
Ignition 12 volts BLUE IGNITION SWITCH HARNESS
Starter BLACK/ BLUE IGNITION SWITCH HARNESS
Dome Light YELLOW/ORANGE (-) DRIVER (A) PILLAR *
Trunk Pin Switch RED / GREEN (-) AT SWITCH OR BULB IN TRUNK
Parking Lamp GREEN/ BLACK (+) BLACK 36 PIN CONN. TO LEFT OF COLUMN
Power Lock MINT GREEN/ RED (Thin) BASE OF A PILLAR OR * #217
Power Unlock SINGLE WIRE SYSTEM UNDER DRIVER DASH

#217 - See Single Wire Door Lock Diagram. * YELLOW (-) At Key Cylinder Or BLACK/ BLUE (-) At Pin Switch Can Also Be Used For Door Trigger ** Doorlock Wire Needs To See Ground Thru A 1K Ohm Resistor To Lock And Ground Thru 620 Ohm Resistor To Unlock Information Courtesy Of Installer!!

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window