504d
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113255
Printed Date: May 16, 2024 at 3:40 AM
Topic: 504d
Posted By: leoeayers
Subject: 504d
Date Posted: April 18, 2009 at 3:16 PM
Can anyone tell me the proper way to install the 504d doubleguard shock sensor on a viper 5900 one end of the harness has a green wire loop and the other has a long green wire not hooked to anything i'm not sure which end goes to the alarm brain and which goes to the sensor and what does the green wire hook too. Any help would be appreciated
Replies:
Posted By: profuse007
Date Posted: April 18, 2009 at 6:47 PM
I always hook to the sensor w/ the loop. If it is the other way, if i remember correctly bc i dont install anymore, there is only single stage, the full trigger.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: aurora24
Date Posted: April 18, 2009 at 9:34 PM
Just like profuse said. Loop goes on shock sensor end. If you hook it up backwards you get the warning then the alarm always. I didn't hook the extra green wire to anything.
Posted By: jcs091570
Date Posted: April 18, 2009 at 11:32 PM
Connect the loop end as mentioned to the sensor end... and the other end to the (-) trigger blue wire on the main harness if it is not gonna be used. If the other end has a plug, just plug it into your brain multiplexed output.
Posted By: aurora24
Date Posted: April 19, 2009 at 10:12 PM
The loop goes towards the shock sensor. The loose wire is for adding other other sensors. If you aren't using it, tape it off. On the new alarms the green is looped back to the blue at the shock sensor. The green on the alarm side is left loose. This is to add additional sensors. https://forum.sounddomain.com/ubbthreads.php/ubb/showflat/Number/1371495/page/1
|