add an extra remote to a viper 5901

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113332
Printed Date: May 07, 2025 at 2:24 PM

Topic: add an extra remote to a viper 5901

Posted By: texas-al
Subject: add an extra remote to a viper 5901
Date Posted: April 22, 2009 at 1:42 AM

Well, I bought an extra 1 way remote for my Viper 5901. Could somebody help me figure out how to program it into the 5901?
Al

Replies:

Posted By: howie ll
Date Posted: April 22, 2009 at 2:17 AM

No owner's manual?

Posted By: texas-al
Date Posted: April 22, 2009 at 2:19 AM

It states that DEI prefers that a professional program the remote. No directions.

Posted By: sledslapper
Date Posted: October 17, 2009 at 7:24 PM

Can someon respond to this post? I have a 5501 and I need to program a 1 way remote.

Thx

Posted By: yimke
Date Posted: October 17, 2009 at 8:57 PM

click and hold the function button for 3 seconds then press function again till car 2 is illuminated. Then do your normal programing.

Posted By: syl20rochon
Date Posted: October 17, 2009 at 9:13 PM

1) Press the f button on the remote until the led stays on
2) Press the start button until it flashes 3 times
3) Turn ignition swith to on position
4) On the antenna. do the following with the switch....press / release / press and hold...You'll hear a horn chirp...
5) Press the lock button on the remote, you should hear a horn chirp..
6) Release switch and turn off ignition switch...you'll hear another chirp
You are done.....

-------------
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.