Mustang 1995 and Door Locks...

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11341
Printed Date: May 16, 2024 at 2:02 AM

Topic: Mustang 1995 and Door Locks...

Posted By: surovich
Subject: Mustang 1995 and Door Locks...
Date Posted: March 23, 2003 at 7:19 PM

Hello!

I know there are alot of posts on Door Lock questions and Alarms and I have gone through all of them - It appears that I have a door lock C system - Ive looked at the diagrams for the wiring and see that I need to use Pink / YELLOW (Lock) and Pink/Green (Unlock) - I am connecting a fai-8100 and it includes 4 different diagrams for wiring. I assumed I needed the 1st (Common) one - I ran the two wires from the kick to the Up/Down wires of the alarm and I get nothing.... there are a total of six wires on the door section of the alarm - On the diagram Im using It has 2 wires connected to something called "Main Line" But I have no idea what that is.... Do I need to wire 1 wire to +12 and 1 to Ground for some reason?

Thanks!

Scott

Replies:

Posted By: Velocity Motors
Date Posted: March 23, 2003 at 8:48 PM

Hey Scott, the type C system requires you to cut the lock/unlock wire in half and wire it up according to this diagram: 5 Wire Alternating 12 Volts Positive Door Locks

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: surovich
Date Posted: March 24, 2003 at 7:10 PM

Great - Going to look at that this weekend - Thank you so much for the reply... You guys are AWESOME!

Posted By: surovich
Date Posted: March 24, 2003 at 7:12 PM

Jeff,

Am I correct to assume (From the Diagram) that I will NEED access to the relay in the door?

Thanks again!

Scott

Posted By: mytgijoe
Date Posted: March 25, 2003 at 10:11 AM

You shouldn't have to access any relays in the door. You can cut the door lock wire in half w/out having to go in the door. You should be able to access this wire at the driver side kick panel.

Posted By: DeathsJester12V
Date Posted: March 25, 2003 at 5:24 PM

surovich,
like mytgijoe said....Drivers Kick has all the wires you need to access for the power locks..

Posted By: surovich
Date Posted: March 26, 2003 at 9:16 AM

Yeah, after I sent the message - I relized that is was a "dumb" question ... Guess I was panicing....

I know the two wires I need, and I know where all 6 from the Alarm go now - Going to try it tonight.

Again, You guys are GREAT! Thanks for the help...

Scott