clifford concept 400 door lock wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113417
Printed Date: July 19, 2025 at 10:51 PM
Topic: clifford concept 400 door lock wiring
Posted By: soarer
Subject: clifford concept 400 door lock wiring
Date Posted: April 26, 2009 at 7:34 AM
Hi, I have just installed the concept 400 with intellivoice and intellistart into my 1992 2.5tt soarer, and I'm having trouble sorting the central locking ;0(
I have the install manual but for the locking system it says refer to supplement but cannot seem to find it anywhere?
I know that the car uses negative pulse and beleive it's type b? but which wires from the system should I connect as there are 6 of them
white / green - lock common
gray /orange - unlock n.c
gray /green - lock nc
white / orange - unlock common
red / green - lock no
red / orange unlock no
Thanks
Gary
Replies:
Posted By: howie ll
Date Posted: April 26, 2009 at 5:42 PM
Grey/orange and grey/green not connected, WHITE/ green and WHITE/ orange to lock/unlock at driver kickwell, RED / green and RED / orange to a good ground, use one of the 10mm (M6) bolts around d/k/p, think trunk and filler cap were also neg, mirror fold was fun, switch acc and 2 relays, ah the wonderful Con 400, ah the Soarer fond memories from 11 years ago!
|