2009 chrysler 300, relay, ignition

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113484
Printed Date: May 08, 2024 at 5:34 PM

Topic: 2009 chrysler 300, relay, ignition

Posted By: russbm
Subject: 2009 chrysler 300, relay, ignition
Date Posted: April 29, 2009 at 8:21 AM

Need help for wiring a relay to a thin ignition 12v Pink/white wire for seat heater that will turn on with the key on and turn off with key off.

Replies:

Posted By: KarTuneMan
Date Posted: April 30, 2009 at 12:14 AM

Thats gonna really suck this summer.......

-------------

Posted By: russbm
Date Posted: April 30, 2009 at 12:54 PM

I really need help on this please. Doing a 2009 Chrysler 300, putting seat heater on both front seat and need to know which wire to add a relay on the pink/white wire on the ignition switch. What will the layout be on the relay. Hope this make sense.

Posted By: howie ll
Date Posted: April 30, 2009 at 3:46 PM

If KTM can't Howie can, ground to switch to 85, ignition to 86, 12v+ permanent via a 30amp fuse to 30 and 87 to the seat heaters. Place a 1N4004 diode across 85 and 86 with the band towards 86, run a 12volt LED with power to one side and ground side to switch side of 85.

Print Page | Close Window