viper 5601 trunk release
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113589
Printed Date: May 03, 2024 at 3:15 AM
Topic: viper 5601 trunk release
Posted By: littlemann49
Subject: viper 5601 trunk release
Date Posted: May 04, 2009 at 2:20 PM
have a viper 5601 hooked up trunk release wire to a relay for trunk release soloenid it does not work with remote when i press aux button when i touch release wire to ground it works ok so wireing to relay is ok is there something in the programing witch makes it work cant seem to find anything in manual any one know please
-------------
petey
Replies:
Posted By: Big Dog
Date Posted: May 04, 2009 at 2:40 PM
Are you using the RED / white from harness 1? Also, you need to press and hold the aux button for at least 5 seconds before it sends the signal.
-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.
Posted By: littlemann49
Date Posted: May 04, 2009 at 5:52 PM
hi thanks for the reply yes i used the RED / wht wire and yes im holding the aux button for 5 seconds still dont work i checked the cricuit if i touch a ground wire to it it works ok seems like control is not giving ground do u know if programing can affect that thank you
-------------
petey
Posted By: littlemann49
Date Posted: May 05, 2009 at 10:33 AM
thanks for the help b.d. i found the problem i wired it wrong i was to lazy to take the harness i made apart but i had to and i found what i did wrong thanks for your help
-------------
petey
|