2008 kia sportage
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113602
Printed Date: May 17, 2024 at 8:19 PM
Topic: 2008 kia sportage
Posted By: rvtech
Subject: 2008 kia sportage
Date Posted: May 04, 2009 at 10:16 PM
Hi, I'm installing a Viper 5701 in a 2008 Kia Sportage 4 cylinder without factory immobilizer. I'm pretty sure I've got all the wiring figured out, but Would really like to see DEI's vehicle specific install instructions for this car before I plug everything in. Any assistance would be greatly appreciated!
Thanks,
Bruce
Replies:
Posted By: rvtech
Date Posted: May 08, 2009 at 8:46 PM
I've also been reading a lot about using diodes when connecting the wires. Is this necessary in this car? Also seems there are 2 ways of connecting the parking lights to the alarm, using 2 relays & grabbing the 2 green wires for right & left side park lights or using the brown wire as a negative trigger for the vehicle's onboard park light relay. I was wondering which is the preferred method?
Posted By: Velocity Motors
Date Posted: May 08, 2009 at 9:20 PM
Using the (-) trigger is easier and less wires to deal with.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|