automate am2 keyless entry
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113659
Printed Date: May 02, 2024 at 1:26 AM
Topic: automate am2 keyless entry
Posted By: bossard
Subject: automate am2 keyless entry
Date Posted: May 07, 2009 at 11:08 AM
I have a Toyota with an aftermarket Automate AM2 keyless entry installed in it. I need a new valet/LED switch that plugs into the module. This unit has the four wire switch and light leads going to one body rather than two seperate ones. Does anybody know where I can buy one? Thanks.
-------------
Bossard
Replies:
Posted By: Big Dog
Date Posted: May 07, 2009 at 12:34 PM
Brossard, although it looks special, it's a regular valet switch which can be found in any Directed security. It connects into a blue 2-pin port. The LED is a regular DEI LED connector as well. This will work , it's just that LED and valet will be two seperate units rather than just one.
-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.
Posted By: bossard
Date Posted: May 08, 2009 at 6:12 AM
I wanted the integrated one because I didn't want to drill a second hole in the panel and the seperate ones are probably a smaller hole than what's there already. Thanks for your input.
-------------
Bossard
Posted By: bossard
Date Posted: May 08, 2009 at 6:45 AM
This may be of help to others. I just found out it is a DEI 8606 combination LED/switch which many vendors carry.
-------------
Bossard
|