master kill switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113720
Printed Date: July 06, 2025 at 11:22 AM

Topic: master kill switch

Posted By: drugorman
Subject: master kill switch
Date Posted: May 10, 2009 at 12:35 AM

I'd like to find a diagram for a master kill switch. I need it to be a toggle switch, or something of the sort located in the cab that cuts power to everything.
I'd prefer to not have to run fatty battery cables to and from my cab, but if that's what it takes, I s'pose that's how it is.
Thanks for any info.

--Dru

Replies:

Posted By: drugorman
Date Posted: May 10, 2009 at 12:36 AM

Sorry, I forgot to say that its a 1988 Ford Bronco II 2.9L V6 4x4 with a manual transmission.

Posted By: i am an idiot
Date Posted: May 10, 2009 at 6:44 AM

Try this.

I would not run the starter wire through this device. It should be pretty easy to find the trucks feed location. If it feeds off of the starter terminal, I would run wire up from starter to the pac-200 and have the 200 only kill power to the vehicle and your system.

Print Page | Close Window