pin switch plymouth colt 1990
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113871
Printed Date: September 13, 2025 at 10:53 AM
Topic: pin switch plymouth colt 1990
Posted By: ivan0730
Subject: pin switch plymouth colt 1990
Date Posted: May 18, 2009 at 1:33 AM
hello everyone im just installing my firts alarm ps- 100 crime stopper on my 1990 plymounth colt and i dont know witch its the pin switch --Door Trigger GREEN/ Red (-) Pin Switch---- can some one help me with to locate the pin swuitch thanks
Replies:
Posted By: i am an idiot
Date Posted: May 18, 2009 at 1:59 AM
Open the car door, find the hinges that hold the door to the chassis of the car. Somewhere between the 2 hinges on the chassis of the car look for a protruding pin that is pressed in by the door when the door is closing. If it is not there, look where the rear of the door meets up with the chassis of the car, is there a protruding pin there? Once you find the pinswitch, that wire should be connected to the back of that pin.
Posted By: ivan0730
Date Posted: May 18, 2009 at 2:54 PM
ONE MORE QUESTION THE PIN SWITCH IT HAVE TO BE CONNECT IT IF YOU WANT O YOU JUST CAN LET IT DESCONECTEC IM WONDERING. THAKNS
Posted By: i am an idiot
Date Posted: May 19, 2009 at 2:42 PM
If the pin switch has only one wire connected to it, then yes it must be mounted in order for it to wirk.
|