python 880xp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113925
Printed Date: July 12, 2025 at 4:26 AM

Topic: python 880xp

Posted By: ksingh
Subject: python 880xp
Date Posted: May 20, 2009 at 8:35 AM

Fellas I currently own a 1996 honda accord EX, I Installed the Python 880XP about 3yrs ago and never encounter any issues with the alarm. This morning I went to do some errans and I hit the unlock button and i did not recieve any response from the alarm. I opened the door with the key and tried using the valet switch to over ride the alarm and that did not work either. I ended up having to power down the alarm by pulling the fuse on the power wire and then wait a couple of mins and installed it again. After that it seems to work and responding correctly. I would like to know what could have possible went wrong and if there is anything i can do like reprograming the remote so this issue does not occur anytime soon.

Thanks

-------------
Kenny

Replies:

Posted By: ksingh
Date Posted: May 20, 2009 at 8:29 PM

God dammm 31 people viewed this page and not one of you can throw some ideas, WOW anyways I found the issue and its fixed. Thanks

-------------
Kenny

Posted By: Mark Mizenko
Date Posted: May 20, 2009 at 10:46 PM

What was the problem? A loose wire??

Posted By: the12volt
Date Posted: May 21, 2009 at 12:22 PM

ksingh wrote:

...31 people viewed this page and not one of you can throw some ideas, WOW anyways I found the issue and its fixed. Thanks

Thread views are counted for non members, search engine spiders, etc. and really mean nothing with regards to getting or not getting a reply.

-------------
posted_image

the12volt • Support the12volt.com