compustar pro2wss as

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114006
Printed Date: July 07, 2025 at 7:57 PM

Topic: compustar pro2wss as

Posted By: badow24
Subject: compustar pro2wss as
Date Posted: May 25, 2009 at 1:36 AM

Hi i just am installing this alarm 2wss-as, and i am having problems with the trunk and dome light. I did not realize I needed a replay for the trunk pop and i was just hooking the (-) output trunk pop to the negative wire in the car. So anyways I used the relay now and it dont work. I got the relay so it sends a positive 12v to the negative side of the switch in the car and nothing. The relay doesn't even make a sound. I know the relay is hooked up right, did it on other (-) outputs and they work. But did I maybe fry the circuit by directly connecting opposed to using the relay? And the same example goes for the dome light.

Thanks

Replies:

Posted By: Twelvoltz
Date Posted: May 26, 2009 at 5:21 PM

What is the Make/Model/Year of vehicle you are installing the system into? What does your multimeter do when you test the wire?

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: badow24
Date Posted: May 26, 2009 at 9:10 PM

1995 pontiac trans am. But I did ask compustar now and they said all i need to do is program to make the dome light work. Default it is off, need to turn it on. So that should explain why it does not work right now.