wiring diagram for an omega max e alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114101
Printed Date: May 06, 2024 at 6:29 PM

Topic: wiring diagram for an omega max e alarm

Posted By: steveosgrl7
Subject: wiring diagram for an omega max e alarm
Date Posted: May 29, 2009 at 5:24 PM

I have an 05 Cavalier. I need to know how to install my Omega Max E alarm. It has remote start. I bought the alarm without a manual. Any input would be appreciated. I am at a loss. Thanks

Replies:

Posted By: tommy...
Date Posted: May 29, 2009 at 7:24 PM

https://www.caralarm.com/manuals/Omega%20-%20Generic/MAX-E.pdf	Battery	RED	(+)	IGNITION SWITCH HARNESS
	Ignition 1	PINK	(+)	IGNITION SWITCH HARNESS
	Ignition 2	WHITE	(+)	IGNITION SWITCH HARNESS
	Accessory 1	ORANGE	(+)	IGNITION SWITCH HARNESS
	Starter 1	YELLOW	(+)	IGNITION SWITCH HARNESS
	Anti-Theft Type	GM PASSLOCK II® ANTI-THEFT SYSTEM
	Anti-Theft Descript	THE BCM MODULE MUST SEE A SPECIFIC RESISTANCE VALUE BEFORE THE VEHICLE WILL START PROPERLY
	Key Sense	LIGHT GREEN	(-)	IGNITION SWITCH HARNESS
	Neutral Safety	YELLOW	(-)	IGNITION SWITCH HARNESS
	Tachometer	WHITE	(-)	LARGE HARNESS ON FRONT OF ENGINE
	Speed Sense	DARK GREEN / WHITE	(AC)	AT PCM MODULE UNDER HOOD ON PASSENGER SIDE FIREWALL
	Parking Lights	BROWN	(+)	AT VEHICLE LIGHT SWITCH
	Brake Lights	WHITE	(+)	AT SWITCH ABOVE BRAKE PEDAL
	Reverse Lights	LIGHT GREEN	(+)	IN HARNESS IN DRIVERS KICKPANEL

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: tommy...
Date Posted: May 29, 2009 at 7:28 PM

< color=#008000>www.the12volt.com/installbay/uploads/D65_< color=#008000>max< color=#008000>-< color=#008000>e< color=#008000>.pdf -

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: tommy...
Date Posted: May 29, 2009 at 7:30 PM

Posted By: tommy...
Date Posted: May 29, 2009 at 7:32 PM

HMMMM...Sorry for that garbled mess...The preview looked fine...Anyhow just use the search feature and your all set...!

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: steveosgrl7
Date Posted: May 30, 2009 at 8:16 AM

Thank you soo much!

Posted By: steveosgrl7
Date Posted: May 30, 2009 at 8:40 AM

ok, at a road block... I have a purple wire and a royal blue wire on the harness, where do they go? The white wire seems to be the only wire that triggers the horn, there is also a fuse on it. Is it the only power source out?

-------------
all you need in life is duct tape and zip ties

Posted By: tommy...
Date Posted: May 30, 2009 at 8:49 AM

If your referring to purple in pin 12...n/c...again if it is blue in 13 pin harness...no connection...Be more specific...the white on the 4 pin harness is for parking lights

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: tommy...
Date Posted: May 30, 2009 at 8:51 AM

Nevermind that post...Wrong install manual...but be more specific...what is the wiring desription of wire...

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: steveosgrl7
Date Posted: May 30, 2009 at 10:37 AM

The wiring harness is white and has 8 prongs. Need to know how to wire the harness to the car. Get power to the system but none of the functions are working. The sensor will not come on, and the system will not arm itself. Know the system works. If you need more info just ask.

-------------
all you need in life is duct tape and zip ties

Posted By: tommy...
Date Posted: May 30, 2009 at 3:24 PM

All Door Trigger
LF Latch	LIGHT GREEN/ BLACK	(-)	AT BCM MODULE TO LEFT OF STEERING COLUMN BEHIND DRIVERS SIDE DASH...To green in 8 pin harness must diode isolate
RF Latch	LIGHT BLUE	(-)	AT BCM MODULE TO LEFT OF STEERING COLUMN BEHIND DRIVERS SIDE DASH...To green in 8 pin harness must diode isolate
Trunk Trigger	BLACK	(+)	AT LIGHT IN TRUNK...To gray in 10 pin harness... must use relay to convert polarity
Parking Lights	BROWN	(+)	AT VEHICLE LIGHT SWITCH...To white in 8 pin harness

Brake Lights

WHITE

(+)

AT SWITCH ABOVE BRAKE PEDAL...To RED / black in 10 pin harness

You have already hooked up siren/horn...?

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Posted By: 91stt
Date Posted: May 30, 2009 at 8:58 PM

Pink = 3rd Channel Output
Green = (-) Door Trigger Input
Blue = (-) Instant Trigger Input
Violet = (+) Door Trigger Input
Brown = (+) Siren Outout
White = (+) Parking Light Output
Green / Violet = Dome Light Output
Black / Red = Dome Light Polarity Select Input (-) or (+) as needed