wiring a led scanner to alarm starter.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114102
Printed Date: April 24, 2024 at 12:39 AM
Topic: wiring a led scanner to alarm starter.
Posted By: cglovesaly
Subject: wiring a led scanner to alarm starter.
Date Posted: May 29, 2009 at 5:26 PM
hello the installer didnt install my scanner to my alarm starter. i had the scanner hooked up to a previous alarm starter that i had installed then had some one take out. kept the scanner got rid of alarm starter. Im looking to hook- up led scanner myself. how hard is it? the previous installer has 3 wires intwined off of the scanner. theres a brown wire and a pink wire and a red wire. where would i hook-up to the brain? any ideas. that would help alot I have a compustar 2W8000FMR (3000) and driving a 99 cavalier. thank you again.
-------------
CG
Replies:
Posted By: Velocity Motors
Date Posted: May 30, 2009 at 8:21 AM
The wiring from the Compustar is easy, but the problem is matching it to the scanner without having a wiring diagram for the scanner. What brand scanner is this ? From the Compustar all you need is the ground when armed to trigger a relay for the scanner or if the scanner can operate from a low voltage output, then no relay is necessary.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: cglovesaly
Date Posted: May 31, 2009 at 1:46 PM
hey jeff. thank you for the reply. um i have a rapter scanner so it scans 3 diff colors and like 30 diff patterns. i looked and i thought i had the instructions but i dont. wonder if there is a website that has wiring diagrams cause that would make wiring up scanner much easier.
-------------
CG
|