window module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114127
Printed Date: May 31, 2024 at 11:48 PM
Topic: window module
Posted By: wes5314
Subject: window module
Date Posted: May 31, 2009 at 12:42 PM
I have code alarm csi 300 hooking up scytek smart window roll up/down module on the rollup module I have to hook up yellow/white to aux channel on alram which I hooked it to aux neg pulse output then hook yellow wire tro ground when armed which I hooked to orange gwa starter wire , when I hit the aux button to roll window down it only rolls passenger window down 3 inches I hit it again it does the same doesnt roll down drivers window, and if I hit unlock on alram it will roll window up what am I doing wrong sorry for long post
-------------
wes5314
Replies:
Posted By: t&t tech
Date Posted: June 01, 2009 at 6:47 PM
have you verified you have the window module corrected to the correct wires, check to see if the wires are outputting voltage when the unit is active, also post back with vehicle year,make and model.
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
|