priority lock w/aftermarket sctuators

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114225
Printed Date: May 22, 2024 at 8:11 PM

Topic: priority lock w/aftermarket sctuators

Posted By: 00sonoma
Subject: priority lock w/aftermarket sctuators
Date Posted: June 04, 2009 at 2:02 PM

putting a viper 791xv in my 88 stang, have the 451m module and 2 wire dei actuators in door from previous alarm.

how would go about wiring it up?

Replies:

Posted By: 00sonoma
Date Posted: June 04, 2009 at 3:42 PM

sorry meant 690xv

Posted By: 00sonoma
Date Posted: June 06, 2009 at 7:56 PM

anyone?

Posted By: 00sonoma
Date Posted: June 08, 2009 at 6:11 PM

oh well guess it cant be done

Posted By: t&t tech
Date Posted: June 08, 2009 at 6:23 PM

sure it can, i haven't used a 451 in a while, if i remember correctly, violet and violet/black- 12 volts permanent

brown black and WHITE/ black- ground

blue/black and GREEN/ black actuators

and the three pin harness onto the corresponding port on the 791xv brain.

Posted By: 00sonoma
Date Posted: June 08, 2009 at 6:42 PM

im trying to lock both on arm and just the driver on 1 press of unlock the pass on 2nd unlock

Posted By: t&t tech
Date Posted: June 08, 2009 at 6:56 PM

ok here's what you do, remove the driver actuator unlock motor leg from the original setup,and using a relay connect like this

pin 87 and 86- twelve volts

pin 87a- ground

pin 85- connect the unlock wire of the alarm ( green)

pin 30 connect unlock leg or actuator

and on the original setup where u disconnected the unlock wire connect the second unlock in it's place

Posted By: 00sonoma
Date Posted: June 08, 2009 at 7:44 PM

awesome thanks for the info

Print Page | Close Window