Alarm/Remote Start
Do you have the Bose or not ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
truck is very easy!. no data module required on any ive done yet, the lock unlock wires are
org/blk and pink/blk at bcm under dash and in plug on left side of dash under removable cover(also a dr unlock only there also(all straight negative trigger)its a lt blue
door trigger for drivers door is there also, pass door trigger in passenger side of dash (under removable cover) if has factory alarm disarm wire is only wire i havent had to search for so i am not sure if its in drivers side of dash plug or only in door
constant hot thick RED / blk at back of fusebox, ignition:pink at ignition switch
accessory:brown@ ign switch
program a blank o+ key and place in a universal transponder module(audiovox astcbm,or D.E.I. 556u)
pk lights lt blue(neg at switch)
brake wire blue/white@ switch
tach:lt blue fuel injector wire on drievers side of motor
will need a module by pac or the likes to add amp to factory system probably(im not a big stereo dealer ) but im sure someone on here or on audio forum can nail that down for you
Velocity Motors wrote:
<A title="View 2007 GMC Sierra 4DR Pickup Car Alarm and Remote Start Wiring Information" href="https://www.the12volt.com/installbay/forum_posts.asp~TID~92759">Alarm/Remote Start</A>
Do you have the Bose or not ?
No I do not.
That's good, no Bose. You can use a normal LOC for this off the deck to the amplifier and then to the speakers. PAC makes some good LOC's that work well with low voltage inputs.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA