ignition control door lock
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114399
Printed Date: May 23, 2024 at 3:20 PM
Topic: ignition control door lock
Posted By: rickyram56
Subject: ignition control door lock
Date Posted: June 11, 2009 at 9:25 PM
Hi there,
I have a compustar alarm/auto starter (2w8000frm-5p) installed in my car. I'm trying to get ignition control door lock working but when i get into the programming menu (I+II twice) and go to option 9 and I try turning it on, I get three flashing lights. I'm trying to turn on option two, which locks the door when the brake is depressed. Am i in the right programming menu? Right now, power locks work, trunk and auto start work fine.
Thanks
Replies:
Posted By: Velocity Motors
Date Posted: June 12, 2009 at 7:52 AM
Do you have some one close to you that has the OP500 programmer ? It's alot easier than using the remote control. Also, if you purchased this through a shop, they should be able to do this for you for free.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|