compustar issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114433
Printed Date: April 30, 2024 at 5:46 PM

Topic: compustar issues

Posted By: sik96teg
Subject: compustar issues
Date Posted: June 13, 2009 at 8:04 PM

I just finished installing the compustar CM1000A. i cant get the my remotes setup on it. i did the whole turning igmition on,off 5 times and no response from the alarm i believe it is suppose to flash the lights twice and nothing. i can hear the relay clicking every time i turn the key i even removed the alarms ignition wire and was touching it to 12v to try it that way. Also the alarm is armed not disarmed so i have my door trigger pressed in so it doesnt go off. which i believe is my problem but i have no way to disarm it.

Replies:

Posted By: i am an idiot
Date Posted: June 13, 2009 at 9:24 PM

I have no idea about the Compustar equipment, but some alarms require the door to be open to enter the programming mode. Is there a valet switch that will allow you to disarm the alarm so you can open the door to enter the programming mode?

Posted By: sik96teg
Date Posted: June 13, 2009 at 10:01 PM

thx for the reply i just got it to work now im trying to figure out the wiring for the universal door actuators.

Posted By: icarus_icarus
Date Posted: June 14, 2009 at 2:27 AM

Reprogamming a new remote I got for my Compustar was finky and a pita, imho. It took 5-6+ tries to get it right...

-------------
·Ï¢årµ§·
posted_image