2002 honda accord ex alarm/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114434
Printed Date: May 21, 2024 at 10:04 PM
Topic: 2002 honda accord ex alarm/remote start
Posted By: cascustomz
Subject: 2002 honda accord ex alarm/remote start
Date Posted: June 13, 2009 at 8:52 PM
I have recently installed an aftermarket alarm/remote start on a 2002 Honda Accord Ex V6 Coupe. After all connection were tested and connected I tried to program the alarm/remote start unit and get no response when pressing the valet switch, which is needed to enter programming mode. The unit is getting power as I have tested both power wire and they read 12V. Also I have installed the needed bypass for the factory security system. I have tried to use another valet switch and still no response. Another reason why I know that the unit is recieving some sort of power is when I press the brake the siren chirps and also the shock sensor LED flashes when there is vibration.
If there is anyone that might the solution to why I can't program the unit or any help with what wire could be wrong to make this happen, please let me know?
Thanks
Replies:
Posted By: KarTuneMan
Date Posted: June 13, 2009 at 9:40 PM
Read this, and try again....
Posted By: profuse007
Date Posted: June 13, 2009 at 9:42 PM
make/model of your alarm unit?
most, if not all, units out there required a door trigger to be tied in. therefore, the door has to be open to get into programming.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: cascustomz
Date Posted: June 14, 2009 at 11:06 AM
My bad for not putting this before but its an alarm system that a customer wanted to me to put in and its made by Absolute, model number FMR-857. Its a 2-way remote paging alarm with remote start.
Hopes this helps and thanks in advance.
Posted By: tommy...
Date Posted: June 14, 2009 at 12:19 PM
Have you tested ignition?
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: tommy...
Date Posted: June 14, 2009 at 12:34 PM
I should of just edited last post...Anyway test ignition at brain and make sure the unit is seeing the ignition ON-OFF. I see that has an ignition kill...Scary...Would not recommend doing that. When driving, if robbery affairs happen, please press button III for 2" after getting off to activate anti-robbery function, which is confirmed by light flashing for 10" followed by siren chirping for 10". In anti-robbery mode, alarm function will be fully activated. The ignition kill will be activated to shut down the engine if you have chosen this feature when installing. (Please note that anti-robbery ignition kill is programmable to be on/off, please refer to your dealer if you have any question.) PASSIVE ARMING FUNCTION...This is a factory reset...Might want to do that just in case you have changed some programming After you figure out Issue Once false setting is made when installation or operation, press Key II+III in normal status for 5" to reset the system to factory settings, confirmed by one siren chirp and one light flash: 1. Auxiliary output duration: 0.5" 2. Anti-rob ignition kill: OFF 3. Gasoline/disel choice: GASOLINE 4. Engine running time after remote started: 15 MINUTES 5. Double pulse unlock: OFF 6. Security re-arming: OFF 7. Door status indicator: OFF 8. Passive arming: OFF 9. Turbo mode: OFF 10. Dome light delay duration: 10 SECS https://www.absoluteusa.com/main_product_manuals/alarms/.pdf
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: cascustomz
Date Posted: June 14, 2009 at 2:07 PM
Thanks. It was the ignition wire to the brain that was causing it to not recognize the off and on. I just had to switch the two different ignition wires now I can go into programing mode.
I have most of the features working on the alarm. The only ones that I need to troubleshoot are the doors on car will not lock or unlock when arming or disarmming with remote pager and also will not remote start.
Posted By: tommy...
Date Posted: June 14, 2009 at 3:41 PM
Did you get door locks in passenger side...What happens when you R/S...Lights on dash etc...
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: cascustomz
Date Posted: June 14, 2009 at 5:44 PM
Yea I do have the door wires running to the passenger side fuse box, but I had some confusion when I hooked up those ones. I don"t know if you are real familiar or not with model of car, but my wiring diagram says that it is BLACK/ blue wire for lock and orange for unlock. When I was testing wires I noticed that the wires connected to the power window switch on the door were ORANGE / black and blue/orange. Any help with this issue would help also the polarities or relay set up?
For the R/S there is no flashing lights on the dash at all.
Posted By: profuse007
Date Posted: June 15, 2009 at 11:28 AM
yeah those are the correct color. i believe it's the green plug w/ bunch of wires and hard to reach. low current 200mA(-) will drive the lock/unlock.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: tommy...
Date Posted: June 15, 2009 at 7:30 PM
profuse007 wrote:
yeah those are the correct color. i believe it's the green plug w/ bunch of wires and hard to reach. low current 200mA(-) will drive the lock/unlock.
Its been awhile...But i think those are the correct colors...I would use my super long needle nose on those when we pre-loaded alarms for the dealership...(Off-Point) Is Southwest Dealer Services still around other then California...?(KARR Alarms) ------------- M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: cascustomz
Date Posted: June 16, 2009 at 6:14 PM
Thanks for all the help I got everything programmed and working properly with the alarm/remote start.
Posted By: tommy...
Date Posted: June 17, 2009 at 8:49 AM
What was actual problem and solution you had/fixed.(just in case another person has the problem)...They read all the way through the post geting more and more excited that the answer is coming and the last post says: Thanks for all the help I got everything programmed and working properly with the alarm/remote start. And he just sits there wondering ...WHAT DID HE DOOOOOOOOOOO...!!! Also did you hook up the anti-robbery ignition kill...I thought that was funny...A guy puts a gun to your face and steals your car...You think, ill show him...And PRESS, car shuts off...For a split second you think Yes...Then you realize the guy is only 200' away and is walking back to you...Seriously dont hook it up...Dangerous!
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
|