Print Page | Close Window

Shock sensor set-up

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11445
Printed Date: September 11, 2025 at 6:16 AM


Topic: Shock sensor set-up

Posted By: Car-Stuff
Subject: Shock sensor set-up
Date Posted: March 25, 2003 at 3:37 PM

I have started using some DEI products and would welcome opinions on how you set up the in-built dual stage shock sensor.

I set it so if I bang on the rear window (not to heavy) it triggers the warn-away and then if I give it a good smack, it goes to full alarm.

I have not had any comebacks for false alarming so far...

Nick

NB:- Using Avital & Hornet




Replies:

Posted By: draasch
Date Posted: March 25, 2003 at 6:04 PM
sounds like you are on the right track.
im sure you will have a false alarm here and there, but with that kind of sensor its bound to happen.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt






Print Page | Close Window