Print Page | Close Window

chto-013

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114512
Printed Date: July 17, 2025 at 12:33 PM


Topic: chto-013

Posted By: chilly
Subject: chto-013
Date Posted: June 17, 2009 at 11:29 AM

i recently installed a Kenwood KVT-514 in my 07 Dodge Charger and i used a CHTO-013 everything worked fine untill i tried to set my aftermarket alarm which is a Autopage RS-1000 and i noticed it would not lock my car. I used the bypass XK-532 which uses the car data wire to function with the door locks and bypass for remote start and i know the CHTO-013 also uses the data wire from the vehicle to function i know that's what is causing the problem because when i disconnect it the door locks work just fine so im wondering if anyone knows how to fix this problem

-------------
chilly



Replies:

Posted By: the12volt
Date Posted: June 23, 2009 at 2:46 PM
Topic moved from Forum Help to Car Security.

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window