02 ranger keyless entry/alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114572
Printed Date: May 18, 2025 at 11:53 PM
Topic: 02 ranger keyless entry/alarm
Posted By: mrshoehorn
Subject: 02 ranger keyless entry/alarm
Date Posted: June 19, 2009 at 9:54 PM
I've recently purchased some auto locks and A10 alarm system for my 2dr ranger with manual locks. I've installed the actuators in both doors and wired up most of the wires.
My question has to do with finding the wires for the Green: Door Trigger Input (-) and the Purple: Door Trigger Input (+).
Any help would be awesome. Even a quick step by step for the whole thing might be informative as well.
Thanks!
~ Shoe
Replies:
Posted By: KarTuneMan
Date Posted: June 20, 2009 at 11:07 AM
Posted By: t&t tech
Date Posted: June 20, 2009 at 7:04 PM
you will only be using the green wire of the harness, eliminate the purple, you could probably use the domelight wire, under these circumstances, if the dome light when on the door position goes out immediately when the doors are closed, or once the doors are locked the light goes out within a couple seconds, you can find this wire in either of the a pillars, in lowlux rangers it's normally in the passenger pillar. cheers
|