clifford 50.7x problem with 2way remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114594
Printed Date: May 17, 2025 at 6:24 PM
Topic: clifford 50.7x problem with 2way remote
Posted By: renrab
Subject: clifford 50.7x problem with 2way remote
Date Posted: June 21, 2009 at 8:53 AM
Hi, thanks for looking,
I recently installed a clifford 50.7x, I was able to program the 1way remote, arm/disarm the system, etc. When I went to program the 2way remote I can't get it into the main menu. The instructions with the clifford say to hold (f) for 8s. I hold it for 8s and nothing changes, it just flashes the transmission signals, than makes an abrupt noise and shows an X, which I read up was transmission out of range.
Any input or help with this issue would be greatly appreciated, I will be ringing out the antenna wires to ensure I didn't pinch anything during installation.
Thanks
Replies:
Posted By: renrab
Date Posted: June 21, 2009 at 11:05 AM
I checked continuity on the antenna wires everything is fine... I am at a loss for what it is.
Posted By: t&t tech
Date Posted: June 21, 2009 at 11:58 AM
if your one way remote still works, i don't think the antenna would be your problem, if you try to re-program the one way remote again, do you gain access to the menu features?
Posted By: renrab
Date Posted: June 21, 2009 at 12:55 PM
yes i can access everything from the 1way, I am wondering if I should delete all remote and try readding?
Posted By: raggdout63
Date Posted: June 22, 2009 at 11:33 PM
did you get the addendum in your 50.7x telling you how to program the remotes. Both must be done one after the other. Otherwise they wont work. If you didnt get that Ill find mine and post up the instructions.
Posted By: renrab
Date Posted: June 23, 2009 at 4:36 PM
Maybe I need to read it again but I believe I did it correctly, it mentioned nothing about adding either in a certain order or at any certain time...
|