how to make a handmade bypass module?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114656
Printed Date: May 03, 2024 at 5:57 AM
Topic: how to make a handmade bypass module?
Posted By: equate
Subject: how to make a handmade bypass module?
Date Posted: June 24, 2009 at 12:51 AM
I am currently in a small town. I dont know where I can buy a bypass module at local. I remember one guy told me that he can just use some wires to make a bypass module. Is there anyone knows how to do this?
Replies:
Posted By: i am an idiot
Date Posted: June 24, 2009 at 5:39 AM
?
-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
Posted By: KPierson
Date Posted: June 24, 2009 at 7:15 AM
They crystal ball acting up again? I know you can make a bypass module for that one car by wrapping stuff around the thing x amount of times and then hooking it up. ------------- Kevin Pierson
Posted By: KarTuneMan
Date Posted: June 24, 2009 at 7:35 AM
Try it again..... all though I doubt this will help!
Posted By: tommy...
Date Posted: June 24, 2009 at 8:10 AM
relay and some resistors should work.......................Dude ...What kind of car...Year,Make,Model!!!!!!!!!!!!!!!!!!!! There's more then just one kind of factory security...Where did i put the pic of the crystal ball... It sounds like one of those answers on a test...I pick (d) not enough info to answer the question... What kind of small town...Are you in the states...?
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: howie ll
Date Posted: June 24, 2009 at 4:16 PM
Got to be a Morgan Plus 8 with a chipped BMW 4.4 V8. Oh all right I want to be a Craig /Gary/Kevin but they all got there first. Come on if the guy's posted in the US it's an F150/Ram or Explorer. Bet it's a GM (whatever they were).
Posted By: equate
Date Posted: March 24, 2010 at 12:55 PM
Sorry that I am not in US and reply this late.
This car is imported Kia cerato 2009. Not popular car thats why I couldnt get bypass module for it. There is no universal bypass module here.
Finally got it done just taped chipset closed to cylinder giving constant RF signal. Though it is not safe but owner doesnt care about this. He just want it to be remoted start.
Posted By: tedmond
Date Posted: March 24, 2010 at 3:15 PM
a relay and ALOT of thing gauge wire. ------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: tedmond
Date Posted: March 24, 2010 at 3:17 PM
85 - GWR/status output
86 - constant 12v
87 - wire wrapped around key, to ignition cylinder and back to relay terminal 30.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: equate
Date Posted: March 25, 2010 at 1:16 AM
tedmond wrote:
85 - GWR/status output
86 - constant 12v
87 - wire wrapped around key, to ignition cylinder and back to relay terminal 30.
Thanks a lot.
|