Print Page | Close Window

autopage lock/unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114692
Printed Date: April 29, 2024 at 10:39 AM


Topic: autopage lock/unlock

Posted By: xtreme49
Subject: autopage lock/unlock
Date Posted: June 25, 2009 at 8:23 PM

Hello Guys

I was wondering if anyone has had any experiences with Autopage specifically RS-900 my question is the door lock and unlock wires. the alarm has two wire that both lock and unlock so my question is

How do make the wires send out positive or a negative pulse? I was looking to see if they were programmable but no luck...
posted_image


I Have a 2004 Corolla LE
POWER DOOR LOCK   -- GREEN (-)
POWER DOOR UNLOCK -- BLUE/BLACK (-)

https://www.the12volt.com/installbay/forum_posts.asp~TID~42362

any help will be appreciated. will be doing the install during weekend



Replies:

Posted By: soundnsecurity
Date Posted: June 25, 2009 at 10:29 PM
you hook them up based on the type of locks in the car. if the car has positive locks you use the blue for lock and the green for unlock. if you have negative locks then you would do the opposite.

you can also use it the same way to activate a relay for reverse polarity locks or anything else that would need a relay for.

-------------




Posted By: tommy...
Date Posted: June 25, 2009 at 10:48 PM
Yep when the polarity changes...So does the function...There is nothing to change in programming...Green wire from alarm goes to green wire in car...Blue wire from alarm goes to Blue/black in car...Connect them and will be locking/unlocking in no time...!

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!




Posted By: xtreme49
Date Posted: June 26, 2009 at 5:15 AM
thanks for the replies guys I'll let you know how it turns out




Posted By: xtreme49
Date Posted: July 01, 2009 at 10:51 PM
As promised. The install was a sucess I want to thank you all for the responses.

VIVA THE12VOLT lol




Posted By: tommy...
Date Posted: July 02, 2009 at 9:19 AM
Your Welcome...Congrats on the successful install...Dont forget to support your local install shop...Even to just buy product...!

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!





Print Page | Close Window