bypass passenger switch
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114695
Printed Date: May 29, 2024 at 2:10 AM
Topic: bypass passenger switch
Posted By: manassasralph
Subject: bypass passenger switch
Date Posted: June 25, 2009 at 10:08 PM
I am installing universal power window kit. Instead of putting two switches in the drivers door and one in the passengers, I want to install the two drivers side switches in the center console and bypass the passenger switch.
Passenger switch receptacle has (position 1)pink + (position 5)yellow wire coming from power window motor; (position 3)white (center position in receptacle); (position 2) blue; (position 4) purple.
I'm lost, how can I eliminate the switch?
Any help is appreciated.
Replies:
Posted By: tommy...
Date Posted: June 25, 2009 at 10:34 PM
If you could list the Part # of window kit w/ the year , make , model of the car...Im sure it will help specific questions/answers...!
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: manassasralph
Date Posted: June 26, 2009 at 10:48 AM
Universal Power Windows with 3 switches (2 window kit) is a PROW-200 by Protocol.
Vehicle is 94 Ford Ranger reg cab with manual windows.
Posted By: howie ll
Date Posted: June 26, 2009 at 4:44 PM
Just wire both windows as the driver's switch, ie power to centre terminal, next two out are the grounds, outers are up and down motor wires.
|