530t on a 1990 chevy truck
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114773
Printed Date: May 21, 2024 at 9:33 PM
Topic: 530t on a 1990 chevy truck
Posted By: draggin95niss
Subject: 530t on a 1990 chevy truck
Date Posted: June 30, 2009 at 8:46 AM
as stated above, im installing a dei 530t window module on a 1990 chevy truck, i was wondering if im gonna have to go into the doors or if im gonna be able to get my wires in the drivers kickpanel?
Replies:
Posted By: rtsv_dancro
Date Posted: June 30, 2009 at 9:59 AM
you're gonna have to run some wires into the door from the cab, so, yes, i would think so. unless someone knows an easier way.
-------------
"It is impossible to defeat an ignorant man in argument."
- William Gibbs McAdoo
Posted By: Mark Mizenko
Date Posted: June 30, 2009 at 12:37 PM
How would you be able to get the drivers window wiring WITHOUT going into the divers door? You can get the passenger wires in the drivers kick, but thats it. Extend the (motor)wires going into the drivers door with 8Ga minimun. Dont put the module in the drivers door! It WILL get wet and ruined, real quick. Run minimum 8Ga power wire to the module. Out to the battery is a good idea, but not necessary. You're going to need to get alot of power to that module, but it work perfectly on the default/facory setting.
Posted By: t&t tech
Date Posted: June 30, 2009 at 4:38 PM
also if you run the wires to the motor in the passenger door as well, you would have one touch fuctions at both driver and passenger controls for the windows, just a thought, cheers.
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: draggin95niss
Date Posted: July 01, 2009 at 10:13 AM
thanx guys i ran wires into both doors and as mentioned i have one touch on both doors, which i think is kool,but anyhow, i figured id post back that i got it....thanx again...
Posted By: rtsv_dancro
Date Posted: July 02, 2009 at 6:59 PM
good to hear man!
-------------
"It is impossible to defeat an ignorant man in argument."
- William Gibbs McAdoo
|