Print Page | Close Window

door locks for 94 mustang

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114811
Printed Date: May 02, 2024 at 12:30 PM


Topic: door locks for 94 mustang

Posted By: ctcgxp
Subject: door locks for 94 mustang
Date Posted: July 02, 2009 at 9:55 AM

This car did not have power locks when it was new.. the previous owner changed the doors that have power locks in them. The power locks are not curently wired. I would like to know how to wire them with my Alpine sec150r. Any help would be great.




Replies:

Posted By: profuse007
Date Posted: July 02, 2009 at 12:25 PM
it would help to get a picture of the OEM door lock actuator. how many wires coming out?

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).



Posted By: tommy...
Date Posted: July 02, 2009 at 2:34 PM

So it will work off alarm and the switch is the plan...Is all existing wires intact...And both doors are the same...?



-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!



Posted By: ctcgxp
Date Posted: July 03, 2009 at 1:09 PM
There are two wires coming off the actuators, the rest of the wiring is not intact other than the switches. I'm having a problem finding the factory power wires


Print Page | Close Window