98 chrysler sebring lxi coupe viper 5601
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114821
Printed Date: November 04, 2025 at 5:13 AM
Topic: 98 chrysler sebring lxi coupe viper 5601
Posted By: md1gs
Subject: 98 chrysler sebring lxi coupe viper 5601
Date Posted: July 02, 2009 at 4:15 PM
Does anyone have remote start wiring info on a 98 chrysler sebring lxi coupe? And will i need a bypass to install a Viper 5601 in my car?
Thanks
-------------
...
Replies:
Posted By: md1gs
Date Posted: July 02, 2009 at 10:08 PM
i've instaled keyless entry and alarm systems and alot of car audio before but never an auto start. It doesn't seem that hard, but some people are telling me that i need a bypass and some others are saying i don't, can i install this auto start without a bypass?
-------------
...
Posted By: ckeeler
Date Posted: July 06, 2009 at 9:34 AM
if you look at the top of the page under "vehicle wiring" you will find the wire info you need for the vehicle you are working with. you wont need to use any type of bypass for the coupe.
Posted By: md1gs
Date Posted: July 09, 2009 at 7:31 PM
Ok i finally have it all hooked up and everything works great, only problem is i can't figure out how to get the doors to lock/unlock. my car has the 3 wire negative system- and this viper has positive outputs. This car came with a keyless entry system so i found the relays that show a positive charge when the car is locked/unlocked. but when i connect the viper to these wires the doors don't unlock/lock but i did set off the factory alarm. can anyone help?
-------------
...
Posted By: i am an idiot
Date Posted: July 09, 2009 at 8:04 PM
Posted By: the12volt
Date Posted: July 09, 2009 at 8:21 PM
Topic moved to Car Security forum. -------------  the12volt • Support the12volt.com
|