04 duramax 457g

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114837
Printed Date: May 09, 2025 at 1:39 PM

Topic: 04 duramax 457g

Posted By: duramax_d
Subject: 04 duramax 457g
Date Posted: July 03, 2009 at 8:01 PM

i just got done doing a 2004 chevy silverado diesel using the 457g and i have the pink and pink/black left

what wires would these go to on the ign harness the truck starts up then shuts right off

thanks

Replies:

Posted By: KarTuneMan
Date Posted: July 04, 2009 at 7:52 AM

They are used at the Passlock module on the truck. If not installed you get the results YOU have seen.... no start!

Read...........

-------------

Posted By: JWorm
Date Posted: July 04, 2009 at 10:18 AM

The pink and pink/black wires are not used on a vehicle with Passlock II. Therefore, you do nothing with them.

Posted By: duramax_d
Date Posted: July 04, 2009 at 11:31 AM

thanks for the help i got it

Posted By: KarTuneMan
Date Posted: July 04, 2009 at 10:32 PM

Yes PK3, not passlock.... my bad for reading like an old guy! posted_image

Boy do I feel silly.

-------------

Print Page | Close Window