compustar auxiliary activation

2007 Scion TC
Compustar 4200DX remote start

I am having an issue with the auxiliary output activation using my remotes.

I installed two DEI 529T window modules that I want activated using the remote. Aux 1 to roll up and Aux 2 to roll down.

It seems that the Aux outputs will not activate using either remote. I turned the secure aux output off (option 4-05) to help. When I press the button for the aux 1 or 2 on the remote, it indicates that it is operating and I do hear a relay in the brain, but the windows do not move.

I then tested the module by changing options 4-03 to arm instead of remote, and option 4-04 to disarm instead of remote. The windows will then roll up and down on arm and disarm.

Any ideas?

Try metering the wires to see if you are getting output from the brain. What do you have 4-01 and 4-02 programmed as?

I have 4-01 and 4-02 set at the default 0.5s. I did test the output and I wasn't showing anything on the multimeter. Later I'm going to try to change those two settings and check again.

I'm trying to get mine working as well, but I need an OP500 programmer. Mine are currently set to horn output and dome light output. You say yours works when changing it to arm/disarm, but doesn't work with remote. Weird.