python 991, dlpkkich3, unsure of plan
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114999
Printed Date: May 18, 2024 at 11:31 PM
Topic: python 991, dlpkkich3, unsure of plan
Posted By: N4cer
Subject: python 991, dlpkkich3, unsure of plan
Date Posted: July 11, 2009 at 7:33 AM
I'm wanting to install a remote start on my 2006 Dodge Ram 2500 Diesel truck. I have the following sitting here brand new:
Python 991 (alarm with remote start)
Xpresskit DLPKKICH3
I have done a remote start install years ago, but it was very basic and on an older vehicle. But I can do it is my point. I don't need the alarm functions, just the remote start. The part I'm unsure of (and the instructions don't specify) is: what all does the DLPKKICH3 perform, and which connections do I need to make with the Python?
I know that sounds stupid and basic, but it is somewhat new to me. I'm unsure if the CAN bus part of the DLPKKICH3 does the lights?
Starter?
I know it does locks and ignition key fooling, but does it do the actual energizing of the system?
Am I just to hook up the power to the Python and let the interface take care of the rest?
Any assistance would be great. Thanks.
Replies:
Posted By: chev104275
Date Posted: July 11, 2009 at 8:23 AM
looks like from the web site it does the following depending on how its hooked up
W2W = wire to wire
D2D = Data To Data
W2W
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
KI-Chrysler MUXX Activation
KI-Key & Ignition.switch Interface
PK-Immobilizer Bypass-RFID No Key Req'd
SS-ALL Entry Point Monitoring
SS-CAN Alarm control w/ FOB remote
SS-Entry Monitoring ALL Door Pins
D2D
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
FOB- CAN alarm control w/FOB remote
KI-Chrysler MUXX Activation
PK-Immobilizer Bypass-RFID No Key Req'd
RS-Remote Start Ready
SS-CAN Alarm control w/ FOB remote
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Front Door Pins
SS-Entry Monitoring Hood Pin
-------------
If i Can't Install it I Don't need it Joe
Posted By: N4cer
Date Posted: July 11, 2009 at 11:23 AM
So does that mean basically if I want just remote start functionality, I can hook up just the connections necessary to power the Python, and it gets its info via D2D from the DLPKKICH3? And the DLPKKICH3 just does all the functions including starting through just the CAN connection?
Posted By: chev104275
Date Posted: July 11, 2009 at 1:00 PM
ive never personaly used the product so i dont want to steer you in the wrong direction
good luck
-------------
If i Can't Install it I Don't need it Joe
|