08 corolla disassembly
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115102
Printed Date: May 02, 2024 at 10:35 AM
Topic: 08 corolla disassembly
Posted By: absolutepower
Subject: 08 corolla disassembly
Date Posted: July 15, 2009 at 5:07 PM
does anyone know how to get the underdash off the drver side
-------------
Replies:
Posted By: howie ll
Date Posted: July 16, 2009 at 1:22 AM
If it's like the Euro models, you have to dis assemble (is that a word?) the airbag cover with all the troubles associated. I took off the steering cowl if I had to get to the ignition wires it was easier.
Posted By: KarTuneMan
Date Posted: July 16, 2009 at 8:43 AM
There is not much that you CAN remove from the under side of that car... just pull... The area to 'work" is a tight squeeze! But it's a Toyota, it's laid out smart! Under the column, and in the kick, thats all you need. -------------
Posted By: Mark Mizenko
Date Posted: July 16, 2009 at 12:01 PM
Remove the lower steering collum shroud for access. .
Posted By: howie ll
Date Posted: July 16, 2009 at 5:22 PM
As I said, 3 screws for the steering cowl, DKP and that's it, everything else, alarm CPU, etc behind radio, heater area, it all pulls off, the rest is glovebox and edge strip removal.
Posted By: absolutepower
Date Posted: July 16, 2009 at 6:55 PM
well it was taken care of befor i got a response but i was installing a python991 and the brain as huge and i really was having issues hidein it under the dash -------------
|