how to reprogram viper remotes?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115112
Printed Date: May 15, 2025 at 2:50 PM

Topic: how to reprogram viper remotes?

Posted By: shby1
Subject: how to reprogram viper remotes?
Date Posted: July 16, 2009 at 2:20 AM

Hi, I have the Viper 5701 remote start/alarm. My 2-way remote was failing, so I deleted it, but I can't seem to reprogram it again. Right now I'm using the 1-way remote, but what's the problem? how can I make it work again? Thanks.

Replies:

Posted By: Mark Mizenko
Date Posted: July 16, 2009 at 12:19 PM

What are you doing to try and reprogram it? Are you putting the transmitter in pairing mode? Are you able to enter the learn routine in the vehicle?

Posted By: calijtee1
Date Posted: July 17, 2009 at 3:20 PM

find the clack valet button. turn ign on then press the button once then push and hold the siren will chirp then press button one (lock) it should give you confirmation thats it easy.

-------------
installers do it best. we got the magic hands!

Print Page | Close Window