2005 murano passenger door lock blown
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115299
Printed Date: May 14, 2024 at 4:44 PM
Topic: 2005 murano passenger door lock blown
Posted By: shadowinfector
Subject: 2005 murano passenger door lock blown
Date Posted: July 26, 2009 at 6:53 PM
the passenger door lock is not working properly, i think the actuator is gone, can I wire up an after market actuator to the stock wiring without going through the door boot? I have an aftermarket alarm/rs with keyless.....has anyone done this? wiring aftermarket actuator to stock wiring to keep stock functions? let me know thanks
Replies:
Posted By: t&t tech
Date Posted: July 26, 2009 at 7:16 PM
you have to verify with a meter firstly to ensure it is the actuator and not the wiring, once you are getting voltage at the motor wires, then you can go ahead and use an aftermarket actuator and connect it to the motor wires.
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: shadowinfector
Date Posted: July 26, 2009 at 7:46 PM
all the other door lock and unlocks properly when button pushed with aftermarket alarm. the passenger door lock moves very little and moves about half way, ...
Posted By: t&t tech
Date Posted: July 27, 2009 at 3:30 PM
you will still have to verify that the motor is recieving sufficient voltage, i would lean towards the actuator being defective but you still have to meter it to be sure.
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: shadowinfector
Date Posted: August 12, 2009 at 9:09 AM
does anyone happen to have the door lock assembly diagram or door assembly diagram? i need to know if the door locks/actuators are cable type.....also the wiring diagram for the door lock switch if possible....any help thanks
|