1998 Yukon Passkey II bypass
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11530
Printed Date: September 06, 2025 at 10:11 PM
Topic: 1998 Yukon Passkey II bypass
Posted By: dfrates
Subject: 1998 Yukon Passkey II bypass
Date Posted: March 27, 2003 at 1:55 PM
Just installed a Valet 552t remote start with the DEI 555l Passkey bypass. The vehicle will start and then stall when starting using the remote start. If I leave the key on in the ignition, then start using the remote, the system works fine. I can even take the key out . I have the 555l install manual and I believe everything is hooked up correct. Help PLEASE !!!!!
-------------
dfrates
Replies:
Posted By: Velocity Motors
Date Posted: March 27, 2003 at 2:24 PM
What wire did you use for the activation wire for the 555L ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dfrates
Date Posted: March 28, 2003 at 3:27 PM
Jeff, I hooked it up to the blue wire from the 552t. Now I am wondering if I hooked it to the correct blue wire !! There is one in each of two harnesses. I am going to attempt to repair on Sat. morning if you can be of any help, it is greatley appreciated. Thanks, Dennis.
-------------
dfrates
Posted By: Velocity Motors
Date Posted: March 30, 2003 at 9:53 AM
You should use the H3 BLUE/BLACK wire on the Valet 552T for the 555L activation wire. The BLUE wire can be programmed for the 555L but the BLUE/BLACK wire is already for hook up to the 555L.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|